5G Network Planning Solutions

2022-09-23넶Views: 210

1. High-Precision 5G Propagation Models

Ray-tracing propagation model: compared with traditional 3G/4G, 5G networks will be more complex and three-dimensional. At the same time, with the emergence of Massive MIMO antennas and complex antenna beamforming technologies, the importance of multipath modeling has become prominent; without multipath small-scale information, it will be difficult to ensure the accuracy of network planning. Therefore, ray-tracing propagation models based on high-precision electronic maps and capable of multipath modeling play an irreplaceable role in 5G wireless network planning.

For high- and low-frequency empirical propagation models, the 3GPP high-frequency empirical propagation model does not include environmental characteristics such as transmitter height, building height, and road width, nor factors such as tree loss, oxygen absorption, and rain attenuation; meanwhile, the receiver height range is also relatively small.

2. Modeling of Uplink/Downlink Decoupling

Wireless network coverage is determined jointly by the uplink and the downlink, and uplink/downlink balance must be achieved. Base station transmit antennas often have high gain and high power amplifier output, while terminals are limited by size, so their antennas and power amplifiers cannot be made very large; therefore, in most cases uplink coverage is limited. Uplink/downlink decoupling refers to decoupling the relationship between the spectrums used by the 5G uplink and downlink. The frequencies used by the 5G uplink and downlink are no longer fixed to the original association; instead, the uplink can be configured with a lower frequency to solve or reduce the uplink coverage limitation.

The 3.3–3.6 GHz and 4.8–5.0 GHz bands are allocated as 5G operating bands, and the large-scale fading suffered in these bands is difficult to accept for the uplink, whose signal transmit power is relatively low.

3. Refined Coverage Prediction

Coverage prediction is the most commonly used method for evaluating network coverage in network planning, and it is also the foundation of network planning.

In actual engineering planning, the factors that determine the effective coverage range of a base station include: the effective transmit power of the base station, the operating band used, the type and position of the antenna, the power budget, the radio propagation environment, and the coverage indicator requirements of the operator.

4. 3D Coverage Prediction

In the future, more and more traffic will occur indoors, so 3D planning and simulation technology will be crucial to 5G network construction. Therefore, the 3D coverage prediction function extends the simulation area from the traditional 2D plane to a 3D space, simulating various coverage indicators at different floor heights inside buildings.

5. Precise RF Parameter Planning (ACP)

As one of the main features of 5G, Massive MIMO requires precise RF (radio frequency) and BF parameter planning, which is also important for 5G network construction.

Comparing the radiation patterns of traditional antennas and mMIMO antennas, we can see that in traditional single-antenna communication, electromagnetic waves propagate from a single antenna at the base station to a single antenna at the mobile phone; without physical adjustment, the antenna radiation direction is fixed, which limits the number of users that can be served simultaneously on the same frequency. In beamforming technology, however, the base station has multiple antennas and can automatically adjust the phase of the signal transmitted by each antenna, so that the electromagnetic waves effectively superimpose at the mobile phone's receiving point and produce stronger signal gain to overcome losses, thereby increasing the received signal strength.

Massive MIMO antenna beams are divided into static beams and dynamic beams. Static beams use a mechanism in which narrow beams scan the entire cell in turn, selecting appropriate time-frequency resources to send narrow beams; different broadcast beams can be configured for different scenarios to match a wide variety of coverage scenarios, which involves the question of how to plan appropriate beams for different scenarios.

5G precise RF parameter planning enables automatic identification of coverage-area scenarios, beam width design for vertical coverage scenarios, and beam width design for horizontal coverage scenarios.

Vertical scenarios: match the appropriate vertical beam width for the cell and determine the optimal azimuth and downtilt.

Horizontal scenarios: match the appropriate horizontal beam width for the cell and determine the optimal azimuth and downtilt.

6. Precise Site Planning

In the 5G era, sites are deployed ever more densely, and customers need precise site planning solutions to reduce network construction costs. In the early stage of network construction, it is recommended to give priority to using existing 3G/4G sites as candidate 5G sites, and to select candidate sites using a value identification method based on network construction objectives. For areas where site selection cannot meet the network construction requirements, further planning of new sites is then carried out.

5G precise site planning supports multi-scenario and multi-dimensional value assessment, multi-scenario identification, and multi-dimensional identification of high-value areas, enabling more precise planning of high-value sites.