5G Ultra-Dense Networking Planning and Deployment Modes
I. 5G Ultra-Dense Networking Planning and Deployment Modes
Deployment Mode Division of Tasks
Macro Base Station + Micro Base Station
In the macro base station + micro base station mode, control and bearer are separated, which solves the problem of frequent handovers in dense networking environments and improves resource utilization. The specific division of tasks is as follows:
Macro base station: responsible for transmitting low-rate, high-mobility services; manages resource coordination among micro base stations, enabling the access network to flexibly deploy micro base stations according to service development requirements and distribution characteristics;
Micro base station: carries high-bandwidth services and is responsible for capacity.
Micro Base Station + Micro Base Station
Under low network load, micro base stations are managed in clusters; multiple micro base stations in the same cluster form a virtual macro base station and share some resources (including signals, channels, carriers, etc.) for control-plane bearer transmission, achieving the purpose of a macro cell. At the same time, each micro base station independently transmits user-plane data on its remaining resources, thereby realizing the separation of control plane and data plane in 5G ultra-dense networking scenarios.
Under high network load, each micro base station acts as an independent cell and transmits its own data, realizing cell splitting and increasing network capacity.
II. Problems in 5G Ultra-Dense Networking
In dense high-capacity hotspot scenarios, the wireless environment is complex and interference varies. Although ultra-dense networking of base stations improves system capacity, radio resource utilization and spectrum efficiency to a certain extent, it also brings many system problems [1][2]:
System interference. In complex, heterogeneous and dense scenarios, the coexistence of high-density radio access sites may cause serious system interference, including interference from co-frequency deployment of the same radio access technology, interference caused by shared spectrum among different radio access technologies, and interference between different coverage layers, which degrades system spectrum efficiency. How to solve the damage caused by interference and realize the coexistence of multiple radio access technologies and multiple coverage layers is an important issue requiring in-depth study;
Increased mobile signaling load. As the distance between radio access sites is further reduced, cell boundaries become more numerous and irregular, resulting in more frequent and complex inter-cell handovers and a sharp surge in signaling consumption, making it difficult to guarantee mobility performance;
System cost and energy consumption. The introduction of a large number of dense radio access nodes, frequency resources and new access technologies requires that system deployment, operating costs and energy consumption be taken into account simultaneously;
Plug-and-play for low-power base stations. To achieve rapid and flexible deployment of low-power small base stations, small base stations are required to have plug-and-play capabilities, including functions such as self-backhaul, automatic configuration and management.
III. Interference Management in 5G Ultra-Dense Networking
1. Adopt high-frequency co-channel interference management technology [3]
High-frequency band radio resources feature fast attenuation and are suitable for ultra-dense network deployment, as well as for high-rate, high-traffic, small-area hotspot deployment. They can achieve higher spectrum utilization in indoor environments. Therefore, using high frequencies for networking in densely deployed site areas is an important strategy for reducing interference in ultra-dense networking.
Interference coordination: coordinate and allocate time and frequency resources in the network system to reduce interference;
Interference cancellation: when the signal reaches the receiving end, directly eliminate interference through demodulated or decoded information;
Interference suppression: suppress known interference signals by means of interference noise shaping, beamforming and precoding.
2. Adopt spatial interference coordination technology based on cell clustering
It is an interference-based dynamic clustering technology that performs cell interference analysis while taking channel allocation into account. When a user's access point is busy or a neighboring access point is interfered with, the user can communicate with other transmission nodes in the same cluster, enabling the user to dynamically select the best mobile access point and realize periodic updating of the transmission status of communication points, thereby reducing communication interference.
3. Establish a resource allocation algorithm model for micro-cell clustering based on hypergraph theory
Traditional interference management technology: a strategy based on frequency band partitioning, in which cell edge users and cell center users use different frequency bands so that they do not interfere with each other.
Interference formation in an ultra-dense single-layer network: all users orthogonally share the full-band resources and are scheduled in a user-centric manner, forming a seamless, fully covered high-rate network. However, the ultra-dense deployment of micro base stations and users leads to the accumulation of multiple interference paths. In addition, in 5G ultra-dense network scenarios, one channel can be occupied by multiple users and one user can be allocated to multiple channels at the same time, which increases the complexity of network resource allocation algorithms.
Resource allocation based on hypergraph theory: micro users can share frequency bands. Combined with a resource allocation strategy based on frequency and power, it maximizes the throughput of each channel (that is, one channel can be allocated to multiple users) on the premise of meeting the minimum rate requirements of cell users, improving system spectrum utilization and channel utilization.