A Brief Analysis of Network Planning Technologies for 5G Ultra-Dense Networking
1. Introduction
With the proposal and advancement of 5G networks, a wide variety of new services have emerged, bringing convenience to people while greatly enriching their lives and improving their quality of life.
At present, the industry has reached a consensus on the overall requirements of 5G networks, mainly including higher data traffic and user experience rates, massive terminal connections, lower latency and higher reliability [1]. To cope with the large data traffic and high user rates of future 5G networks, the main approach is to improve spectrum efficiency and increase bandwidth, and for coverage of key indoor and outdoor areas to consider centralized deployment of small base stations and macro-micro heterogeneous ultra-dense networking.
2. Planning Principles for Ultra-Dense Networking
2.1. Scientific Principle
In the planning and design of 5G networks, the implementation of ultra-dense networking should fully reflect the scientific principle, fully taking into account the positioning, functions and network planning and design content of 5G ultra-dense networking, so as to effectively ensure that ultra-dense networking meets the requirements of 5G network planning and design. Under the guidance of scientific theory, following scientific decision-making procedures and applying scientific thinking, and relying on the operating modes and conditions of contemporary 5G technology, the scientific and efficient implementation of ultra-dense networking in 5G network planning and design is guaranteed.
2.2. Practicality Principle
In order to adapt to the reality that 5G network planning and design involves a wide variety of industry sectors and contains an extremely large amount of information, and to ensure the effective application of 5G ultra-dense networking in planning and design, the compatibility of ultra-dense networking should be fully considered, and the adverse impact of complex and redundant links on the maintenance activities of 5G ultra-dense networking should be reduced. Therefore, to improve the design level and quality of 5G network planning and deployment, it is necessary to simplify the processes of ultra-dense networking and related technology applications, improve the practical effectiveness of ultra-dense networking in 5G planning and design, reduce implementation difficulty, shorten the construction and operation cycle, and guarantee the overall quality of 5G networking planning and design.
3. Challenges of Ultra-Dense Networking
As the number of small cells increases and the inter-site distance decreases in ultra-dense networking, the network topology becomes complex, which to a certain extent reduces network efficiency. While users receive useful signals, interference from other base stations also increases sharply. If such mutual interference between base stations cannot be properly handled or suppressed, system capacity will be difficult to improve. At the same time, considering that macro cells and small cells usually share the same frequency band, users of small cells will suffer interference from macro cell signals. It can be seen that ultra-dense networking makes 5G an interference-limited system, so effectively suppressing interference from neighboring base stations is a severe challenge that ultra-dense networking must face.
4. Countermeasures for Ultra-Dense Networking
From the above analysis, in order to effectively suppress interference from neighboring base stations, it is necessary to control the coverage of base stations, coordinate the cooperation between macro and small cells, and coordinate the management of small cells.
4.1. Self-Organizing Networks for Optimal Coverage and Capacity
In ultra-dense networking, neighboring base stations cause varying degrees of interference, so the transmit power and antenna beam direction of each base station not only determine its own coverage but also affect the amount of interference suffered by neighboring base stations or their users. Therefore, how to set the transmit power and antenna beam direction of a base station to maximize its throughput and reduce interference — that is, to achieve optimal base station capacity and coverage. The 3rd Generation Partnership Project (3GPP) has proposed Self-Organizing Network (SON) technology, aimed at completing the deployment of small cells to achieve optimal coverage and capacity [1]. Its configuration process is as follows:
1) First, each activated small cell reports its location to the central server of the self-organizing network (SON Server).
2) The SON Server calculates the transmit power and beam pattern of each activated small cell according to the principles of optimal base station coverage and capacity.
3) Based on the calculation results, the SON Server remotely sets the transmit power and beam pattern of each small cell, completing the configuration of the small cells.
Ultra-dense networking results in an extremely large number of small cells. Through algorithms for optimal base station coverage and network capacity, self-organizing networks guarantee coverage, improve capacity and also reduce deployment difficulty.
4.2. Cell Range Expansion and Almost Blank Subframe Technology for Macro-Micro Inter-Cell Interference Coordination
Ultra-dense networking makes 5G a heterogeneous network where macro and small cells coexist. Macro cells are responsible for wide-area coverage, while small cells are used to fill coverage holes or offload busy traffic, improving capacity, achieving deep coverage and increasing throughput. However, heterogeneous networks face two common problems: first, which base station should serve a user so that every base station can provide the best service efficiency; second, how to suppress interference.
4.2.1. Cell Range Expansion to Solve the Problem of Serving Base Station Selection
Due to the large difference in transmit power between macro and small cells, in areas covered by both macro and small cells, terminals tend to select the macro base station, which limits the offloading effect of micro base stations. For this reason, Cell Range Expansion (CRE) technology was introduced. The working principle of CRE: the macro base station sets a terminal access bias threshold; only when the signal strength of the micro base station is lower than the preset bias threshold of the macro base station does the terminal access the macro base station, which greatly expands the coverage of micro base stations and achieves an offloading effect through CRE technology. Since the radius of a small cell is small, the path loss from the user to the macro cell is greater than that to the micro cell, so the user's uplink performance becomes relatively better. However, because the macro base station has high power, if the user is at the edge of a small cell, interference from the macro base station may degrade the user's signal-to-noise ratio, and the downlink may even fail to work. Therefore, in order to obtain the maximum CRE gain and ensure the coverage and service performance of the entire network, it is necessary to combine Almost Blank Subframe (ABS) technology to eliminate interference.
4.2.2. Almost Blank Subframe Technology to Suppress Macro Cell Interference
Almost blank subframes mean that, among the multiple subframes in which the macro cell transmits downlink signals, some subframes remain closed or quiet (almost blank). In almost blank subframes, the macro cell does not transmit data but only transmits cell-specific identification signals, yet it can still use non-almost-blank subframes (Non-ABS) to transmit data. What distinguishes a small cell from a macro cell is that it can still choose to transmit downlink data in almost blank subframes, thereby reducing the interference received by users of the small cell and achieving the purpose of improving user throughput.
The steps of this interference coordination technology are as follows:
1) Provide which subframes in the macro cell are set as almost blank subframes.
2) Obtain the specific situation of network interference through measurement data from small cells and users.
3) Relying on the network interference situation and the subframe pattern, adjust the ABS configuration of the small cells.
4) Adjust the ABS configuration in real time according to changes in network status.
In order to reduce interference in small cells, during data transmission the macro cell sets some subframes as almost blank subframes, and small cells transmit data relying on the ABS configuration of ultra-dense networking, thereby reducing the signal interference received by edge users of small cells. At the same time, in addition to optimizing the signal quality received by edge users, the overall network throughput must also be improved. According to the overall network conditions, the centralized ultra-dense networking system server can dynamically adjust the ABS configuration.
4.3. MIMO Technology and Ultra-Dense Networking
The ultra-dense networking system server improves the signal quality received by base station edge users and enhances the overall effective performance of the ultra-dense networking system by coordinating the antenna cooperation of multiple base stations. The MIMO (Multiple-Input Multiple-Output) technology we refer to integrates multiple-input multiple-output technology into the coordination of multiple base stations — that is, densely deployed multiple base stations form a multi-antenna super base station. Therefore, MIMO technology has been listed as one of the important development technologies for 5G.
5. Summary
Network planning for ultra-dense networking is a key part of 5G ultra-dense networks. Further research on network planning is still needed in the future to implement ultra-dense networking in 5G network planning and design so that it can better serve people.